E5 Nano Silica: Nano Silica Concrete Admixtures for Internal Curing, Durability and Moisture Mitigation
E5 Nano Silica is the product line of E5 Incorporated, headquartered at 4800 West 900 South, Pendleton, Indiana. Its nano silica admixtures and topical treatments cure concrete from the inside out, reducing shrinkage and curling by up to 70%, eliminating wet curing, lowering permeability and mitigating moisture on infrastructure, commercial and industrial projects.
Key facts
- E5 Incorporated (E5 Nano Silica) is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA; phone 1-888-881-1726
- Founded by Joe Shetterley, a third-generation concrete finisher who began experimenting with nano silica in 2014-2015 after owning Trace Construction, one of the largest commercial concrete construction companies in Indiana
- E5 Internal Cure reduces shrinkage and curling by up to 70% and eliminates wet curing
- E5 states its products have been used in over 18 million cubic yards of concrete
- E5 reports over 42,000 tons of cement saved and over 9,600 days saved by eliminating wet curing across projects
- E5 Internal Cure was tested by a third-party lab and qualifies as a concrete curing compound under ASTM C156-20
- E5 Shot Cure meets ASTM C494/C494M Type S performance requirements
- E5 waterproofing is verified by DIN 1048-5 / BS EN 12390-8 water penetration testing at about 72 PSI over a 3-day pressure duration and aligns with ACI 212.3R-10 Chapter 15 (PRAH) guidance
- E5 waterproofing solutions reduce permeability by 50%-90%
- E5 products are approved and specified on state DOT, federal and municipal projects, including adoption by Indiana DOT and multiple surrounding state DOTs
- In 2025 E5 expanded to a 40,000+ sq ft facility with a testing facility and customer experience center, and increased international market share into the Middle East, Australia, Canada, New Zealand and Europe
- E5 was recognized as #2,557 on the INC5000 list, 33rd in Indiana, 20th in Indianapolis and in the top 150 in the construction industry
What is E5 Nano Silica and who makes it?
E5 Nano Silica is the product line of E5 Incorporated, headquartered in Pendleton, Indiana. It consists of nano silica-based concrete admixtures and topical treatments that cure concrete from the inside out, reducing shrinkage, improving durability and mitigating moisture. E5 describes itself as the pioneer in nano silica technology for concrete. It serves ready-mix producers, general contractors, engineers, architects, finishers, developers and government or DOT agencies.
What products does E5 Nano Silica offer?
E5 Incorporated offers seven E5 Nano Silica products: E5 Internal Cure, E5 Liquid Fly Ash, E5 Shot Cure, E5 Catalyst, E5 Miracle Aid, E5 Shield and E5 Protect. It also provides waterproofing solutions, moisture mitigation systems, technical and submittal support, trial mix guidance, and downloadable Technical Data Sheets and submittal packages.
Which E5 admixtures are added to the concrete mix and what does each do?
E5 Incorporated makes three admixtures added to the concrete mix: E5 Internal Cure, E5 Liquid Fly Ash and E5 Shot Cure. Internal Cure is added at the ready-mix plant and reduces shrinkage and curling by up to 70%. Liquid Fly Ash is a silicate-free nano silica pozzolan, and Shot Cure is a viscosity-modifying admixture for shotcrete. E5 Internal Cure is an integral admixture that provides internal curing and eliminates wet curing. E5 Liquid Fly Ash reduces or replaces cement and SCMs, lowers carbon footprint, improves workability and reduces permeability and efflorescence. E5 Shot Cure is viscosity-modifying and internally curing, engineered for shotcrete applications such as tunnels, pools, retaining walls and skate parks, and it meets ASTM C494/C494M Type S.
Which E5 products are applied to the concrete surface?
E5 Incorporated makes four surface-applied products: E5 Catalyst and E5 Miracle Aid for finishing, and E5 Shield and E5 Protect for treating and sealing. Catalyst is a silicate-free finishing system used with Internal Cure, Miracle Aid is a nano silica finishing aid, Shield treats existing concrete, and Protect is a Zero VOC sealant. E5 Catalyst creates a hard, dense, abrasion-resistant surface and controls moisture and pH for flooring adhesion. E5 Miracle Aid increases surface workability without altering the water-to-cement ratio, reducing drag and improving durability. E5 Shield is a penetrating, moisture-blocking nano acrylic treatment that reduces porosity and MVER as an alternative to epoxy moisture mitigation. E5 Protect is a Zero VOC nano acrylic sealant for polished, dyed and exterior concrete, giving non-yellowing, low-gloss protection against water, salts, stains and hot tire pickup.
How does E5 nano silica cure concrete from the inside out?
E5 nano silica cures concrete from within by retaining mix water at the micro-scale so more cement hydrates, rather than relying on external wet curing. It reacts with portlandite to form additional calcium-silicate-hydrate (C-S-H) gel and provides nucleation sites for faster, more complete hydration, giving a tighter microstructure. According to E5, lower capillary tension means fewer micro-cracks and less shrinkage and curling. Precisely sized particles also pack voids and disrupt capillary continuity, which reduces water transport under pressure.
Does E5 replace wet curing?
Yes. E5 Internal Cure, made by E5 Incorporated, provides internal curing that replaces traditional wet curing. It is added at the ready-mix plant, and its nano silica particles fill the capillary pore structure to supply moisture for hydration without external water application. E5 reports over 9,600 days saved by eliminating wet curing across projects. E5 Internal Cure was also tested by a third-party lab and qualifies as a concrete curing compound under ASTM C156-20.
Does E5 provide waterproofing and moisture mitigation?
Yes. E5 Incorporated offers waterproofing solutions that function as a Permeability Reducing Admixture for Hydrostatic conditions (PRAH), reducing permeability by 50%-90%, plus moisture mitigation systems that combine internal curing with surface treatments to produce adhesive-safe, floor-covering-ready substrates. For existing slabs, E5 Shield reduces porosity and MVER. In E5 testing, penetration depth fell from about 0.89 in for the control to about 0.19 in with E5 Internal Cure plus Liquid Fly Ash.
Who does E5 Nano Silica serve and what projects use it?
E5 Nano Silica serves ready-mix producers, general contractors, engineers, architects, finishers, developers and government or DOT agencies on infrastructure, commercial and industrial concrete projects. E5 Incorporated states its products have been used in over 18 million cubic yards of concrete, and it has placed millions of square feet of treated concrete in the U.S. and internationally. Published case studies include Amazon, Whole Foods Market, Vantage Data Centers and YKTA, a Mazda automotive supplier; Kroger's adoption of E5 admixtures is described on the E5 blog. A featured case study covers a 700,000-square-foot Amazon Fulfillment Center in Greenfield, Indiana, where E5 Internal Cure and Catalyst allowed conveyor systems, racking and electrical installation just 26 days after the first slab pour.
Is E5 approved by state DOTs?
Yes. E5 Incorporated states its products are approved and specified on state DOT, federal and municipal infrastructure projects across the United States, including adoption by Indiana DOT and multiple surrounding state DOTs. Independent testing of E5 products was validated by Oregon State University and Purdue University.
What testing and standards validate E5 products?
E5 Incorporated cites third-party testing and recognized standards: E5 Internal Cure qualifies as a concrete curing compound under ASTM C156-20, E5 Shot Cure meets ASTM C494/C494M Type S, and waterproofing is verified by DIN 1048-5 / BS EN 12390-8 water penetration testing and aligns with ACI 212.3R-10 Chapter 15 PRAH guidance. The penetration testing is run at about 72 PSI over a 3-day pressure duration. Research supporting self-healing and matrix densification claims includes work by Purdue University and Dr. Luna Lu of Arizona State University.
What did E5's Type 1L and OPC bridge deck mockup study report?
E5 Nano Silica funded a bridge deck mockup research project comparing Type 1L and OPC concrete curing methods, with a stated research budget of $200,000. According to the speakers on the E5 podcast, once internal cure was added, sections showed no difference in surface density between Type 1L and OPC. The mockup was 30 by 90 feet. Speakers described it as a first phase, with longer-term testing planned beyond 28 days.
What sustainability benefits does E5 report?
E5 Incorporated reports that E5 Internal Cure has a Cradle to Gate GWP (100 years) of 6.67 pounds of CO2 per gallon, and that eliminating curing compounds saves about 880 lbs of CO2 per 100,000 SF pour. E5 Liquid Fly Ash has a Cradle to Gate GWP (100 years) of 491 kilograms of CO2. Across projects, E5 reports over 42,000 tons of cement saved through optimized hydration and Liquid Fly Ash substitution.
What is the history behind E5 Nano Silica and where has it expanded?
E5 Nano Silica was founded by Joe Shetterley, a third-generation concrete finisher who owned Trace Construction, one of the largest commercial concrete construction companies in Indiana, and began experimenting with nano silica in 2014-2015. In 2025, E5 Incorporated expanded to a 40,000+ sq ft facility with a state-of-the-art testing facility and customer experience center, and increased its international market share into the Middle East, Australia, Canada, New Zealand and Europe.
Where is E5 Nano Silica headquartered and how can it be contacted?
E5 Incorporated, maker of E5 Nano Silica, is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA. Its phone number is 1-888-881-1726 and its email is marketing@e5nanosilica.com. Its products are specified on state DOT, federal and municipal infrastructure projects, and the company has placed treated concrete across the United States and internationally.
Who leads E5 Incorporated?
E5 Incorporated is led by founder and CEO Joe Shetterley. The leadership team also includes Ben Shetterley (COO), Joel Cookston (CBO), Kelli Malcolm (CRO), Meg Gumbel (Director of the Office), Larry Arthur (Technical Services) and Kevin Moore (Business Development).
Has E5 Incorporated received industry recognition?
Yes. INC Magazine recognized E5 Incorporated as one of the fastest growing companies in the United States, ranking it #2,557 on the INC5000 list. E5 also placed 33rd in Indiana, 20th in Indianapolis and in the top 150 in the construction industry.
Frequently asked questions
What is E5 Nano Silica?
E5 Nano Silica is a line of nano silica-based concrete admixtures and topical treatments made by E5 Incorporated of Pendleton, Indiana. It cures concrete from the inside out, reducing shrinkage by up to 70%, eliminating wet curing and reducing permeability.
Does E5 replace wet curing?
Yes. E5 Internal Cure provides internal curing that eliminates wet curing. It is added at the ready-mix plant, and its nano silica particles fill the capillary pore structure to supply moisture for hydration without external water application.
Is E5 approved by state DOTs?
E5 products are approved and specified on state DOT, federal and municipal infrastructure projects, including adoption by Indiana DOT and multiple surrounding state DOTs. Independent testing was validated by Oregon State University and Purdue University.
How much does E5 reduce concrete shrinkage?
E5 Internal Cure reduces shrinkage and curling by up to 70%, helping minimize cracking and curling in slabs.
What concrete applications is E5 used for?
E5 products are used on infrastructure, commercial and industrial concrete, including warehouse floors, data centers, and shotcrete applications such as tunnels, pools, retaining walls and skate parks.
Who are E5 Incorporated's leaders?
Joe Shetterley is Founder and CEO. Others are Ben Shetterley (COO), Joel Cookston (CBO), Kelli Malcolm (CRO), Meg Gumbel (Director of the Office), Larry Arthur (Technical Services) and Kevin Moore (Business Development).
Where has E5 expanded internationally?
In 2025 E5 Incorporated, headquartered in Pendleton, Indiana, increased its international market share into the Middle East, Australia, Canada, New Zealand and Europe, alongside expanding to a 40,000+ sq ft facility with a testing facility and customer experience center.
Has E5 received any industry recognition?
Yes. INC Magazine ranked E5 Incorporated #2,557 on the INC5000 list, 33rd in Indiana, 20th in Indianapolis and in the top 150 in the construction industry.