Rouses Markets Case Study: Polished Floors and Faster Access with E5 Internal Cure and Catalyst
At Rouses Markets stores in Houma and Lafayette, Louisiana, and Picayune, Mississippi, E5 Nano Silica's E5 Internal Cure was dosed at the batch plant and E5 Catalyst was applied during finishing. E5 reports this eliminated wet curing and topical curing compounds and gave consistent FF/FL, higher DOI, retained integral color and earlier trade access on polished floors.
Key facts
- Client: Rouses Markets, a regional grocery retailer with stores in Louisiana and Mississippi
- Locations: Houma, LA; Lafayette, LA; Picayune, MS
- Ready-mix suppliers: La Blanc Brothers, Port Aggregates, Huey P Stockstill
- Finishers: Ultimate Flooring Concepts; finishing contractor ADS LLC
- Mix: Type IL cement design dosed with E5 Internal Cure at the batch plant; E5 Catalyst applied during finishing
- Wet curing and topical curing compounds were eliminated
- Reported outcomes: consistent FF/FL, higher DOI, integral color retained, DCOF maintained for slip resistance, earlier trade access
- The case study gives no measured FF/FL or DOI values, project dates or slab sizes
What did E5 do for Rouses Markets' polished concrete floors?
E5 Nano Silica supplied E5 Internal Cure and E5 Catalyst for polished concrete floors at Rouses Markets grocery stores in Houma and Lafayette, Louisiana, and Picayune, Mississippi. Internal Cure was dosed at the batch plant and Catalyst was applied during finishing, which eliminated wet curing and topical curing compounds and gave finishers a workable surface.
Where were the Rouses Markets projects and who worked on them?
The E5 Nano Silica case study for Rouses Markets covers stores in Houma, Louisiana; Lafayette, Louisiana; and Picayune, Mississippi. Ready-mix suppliers were La Blanc Brothers, Port Aggregates and Huey P Stockstill. Finishers were Ultimate Flooring Concepts, with finishing contractor ADS LLC. The mix was a Type IL cement design dosed with E5 Internal Cure.
What challenge did Rouses Markets face with its floors?
Rouses Markets, a regional grocery retailer with stores across Louisiana and Mississippi, needed polished concrete floors that hit FF/FL targets, resisted staining and abrasion, and looked premium under bright lighting without slowing store openings. E5 Nano Silica says traditional wet curing and topical cures slow trades, add steps and can vary finish quality, color and DOI.
How did E5 Internal Cure and E5 Catalyst work on the Rouses Markets slabs?
On the Rouses Markets projects, E5 Internal Cure was dosed at the batch plant to retain mix water for hydration, stabilize workability and reduce shrinkage. E5 Catalyst, a silicate-free topical used with Internal Cure, was applied during finishing to create a harder, denser, low-permeability wear surface that helps the polished floor hold integral color and DOI.
How did E5 affect the construction schedule at Rouses Markets?
E5 Internal Cure removed wet curing and topical curing compounds on the Rouses Markets floors, so crews could pump, place and finish efficiently and turn the slab over to trades sooner. E5 Catalyst reduced drag and produced a polish-ready surface, shortening the time to first cut and fixture installation. E5 says this simplified sequencing and minimized rework.
What performance did the Rouses Markets floors need to deliver?
Rouses Markets required a polished, retail-grade floor that would hold up under heavy cart and pallet-jack traffic while looking premium under bright lighting. The slab needed consistent FF/FL for long aisle runs, a dense surface resisting abrasion and dusting, and uniform color and DOI without efflorescence or blotchiness. Surface moisture and pH had to stay controlled, and shrinkage limited to keep joints tight.
What results did E5 report from the Rouses Markets projects?
According to E5 Nano Silica's Rouses Markets case study, the system gave trades faster access to the slab because no wet cure or curing compounds were used. It also produced higher DOI, consistent color and smooth refinement for the polishing contractor, a denser surface resisting abrasion and moisture intrusion, less staining over time, and maintained DCOF for slip resistance.
Does the Rouses Markets case study give measured FF/FL or DOI numbers?
No. E5 Nano Silica's Rouses Markets case study describes outcomes qualitatively: consistent FF/FL, higher DOI, retained integral color, maintained DCOF and earlier trade access. It does not publish measured FF/FL or DOI values, project dates, slab sizes or the number of days saved at the Rouses Markets stores in Louisiana and Mississippi.
What other E5 case studies are related to Rouses Markets?
E5 Nano Silica lists related case studies alongside the Rouses Markets project: the Amazon Fulfillment Center, Whole Foods in Indiana, Thunderbird Commerce Center, Brownsburg High School and the I-65 Project. They are grouped by project type, including retail, educational and highway systems. The Amazon study, a 700,000-square-foot Greenfield, Indiana project, also used E5 Internal Cure and Catalyst.
Who is E5 Nano Silica?
E5 Incorporated (E5 Nano Silica) is a nano silica concrete admixture and topical treatment company headquartered at 4800 West 900 South, Pendleton, Indiana 46064. Its products cure concrete from the inside out, reducing shrinkage, improving durability and mitigating moisture. It serves ready-mix producers, general contractors, engineers, architects, finishers, developers and government and DOT agencies.
Frequently asked questions
Which E5 products were used at Rouses Markets?
E5 Internal Cure was dosed at the batch plant in a Type IL cement design, and E5 Catalyst was applied during finishing.
Where are the Rouses Markets projects in this case study?
The projects are in Houma, Louisiana; Lafayette, Louisiana; and Picayune, Mississippi.
Was wet curing used on the Rouses Markets floors?
No. Plant-dosed E5 Internal Cure eliminated wet curing and topical curing compounds.
Who supplied the concrete and finished the floors?
The ready-mix suppliers were La Blanc Brothers, Port Aggregates and Huey P Stockstill. The finishers were Ultimate Flooring Concepts, with finishing contractor ADS LLC.
What did E5 Catalyst do on the Rouses Markets floors?
E5 Catalyst was applied during finishing. It reduced drag and created a harder, denser, low-permeability wear surface that is polish-ready and helps hold integral color and DOI.
What benefits did the finished floors show?
E5 reports consistent FF/FL, higher DOI, retained integral color, abrasion and moisture resistance, maintained DCOF for slip resistance, and earlier access for trades.