Whole Foods Market Indianapolis Case Study: E5 Internal Cure and Catalyst
On the Whole Foods Market slab in Indianapolis, Indiana, E5 Nano Silica used E5 Internal Cure, dosed at the batch plant, with E5 Catalyst, applied topically, to replace wet curing and separate hardeners and sealers. E5 reports immediate slab access and up to 7 days saved versus wet curing, with polished-floor performance.
Key facts
- Project: Whole Foods Market, Indianapolis, Indiana
- Ready-mix producer: Shelby Materials
- General contractor: Ryan Companies
- Concrete polisher: VTI
- System used: E5 Internal Cure (at the batch plant) plus E5 Catalyst (topical)
- Schedule gain: immediate access; up to 7 days saved versus wet curing
- Wet curing, topical curing compounds and separate hardeners/sealers were eliminated
- Floor requirements included high FF/FL, consistent gloss, abrasion resistance, low-VOC hygienic conditions and surface moisture/pH control
- Whole Foods Market was founded in 1980 in Austin, Texas and acquired by Amazon in 2017
- E5 Incorporated is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA
What did E5 do on the Whole Foods Market project in Indianapolis?
E5 Nano Silica recommended a two-part system for the Whole Foods Market slab in Indianapolis, Indiana: E5 Internal Cure dosed at the batch plant and E5 Catalyst applied topically during finishing. Together they replaced wet curing and separate hardeners and sealers, improving workability and abrasion resistance and supporting high FF/FL floors. Crews gained faster, safer access to proceed with build-out.
Who was on the Whole Foods Market Indianapolis project team?
- Ready-mix producer: Shelby Materials
- General contractor: Ryan Companies
- Concrete polisher: VTI
- Recommended system: E5 Internal Cure at the batch plant plus E5 Catalyst applied topically
What challenge did the Whole Foods Market slab need to solve?
The Whole Foods Market slab in Indianapolis needed polished-floor performance on a fast retail schedule. According to E5 Nano Silica, traditional wet curing slows the critical path, and topical curing membranes can jeopardize flooring warranties or add costly removal steps. The team needed polished-floor performance without extra chemicals or delays.
How much time did E5 save at Whole Foods Market in Indianapolis?
E5 Nano Silica reports that the Whole Foods Market project in Indianapolis gained immediate slab access and saved up to 7 days compared with wet curing. The team aimed to compress the critical path by eliminating wet curing and the application and removal of a separate curing compound. Refrigeration, racking, electrical and tenant build-out trades needed to mobilize quickly without slab restrictions. Plant-dosed admixtures and a coordinated finishing sequence reduced steps and limited schedule risk from weather variability or rework tied to moisture-related floor issues.
What does E5 Internal Cure do on a retail slab?
E5 Internal Cure is dosed at the batch plant and keeps mix water available for continued hydration. At the Whole Foods Market project in Indianapolis, it eliminated the need for wet curing and topical curing compounds, made pumping, placing and finishing easier, and supported FF/FL consistency for polished retail floors. The result is a denser matrix with reduced shrinkage risk and fewer schedule-killing callbacks.
What does E5 Catalyst do on a polished floor?
E5 Catalyst is a topical product applied in conjunction with E5 Internal Cure. On the Whole Foods Market floor in Indianapolis, it created a micro-grout that reduces drag and stabilizes the surface during finishing. It increases surface pozzolanic reactivity to form a hard, dense, abrasion-resistant wear layer for polished and dyed floors, and supports moisture and pH control at the surface.
What performance did Whole Foods Market require from the floor?
Whole Foods Market required a polished retail slab in Indianapolis with high FF/FL for long aisle runs, consistent gloss and a blemish-free appearance under bright lighting. The surface also had to resist abrasion from carts and pallet jacks, tolerate routine cleaning chemicals and food-related spills, and minimize dusting and efflorescence. Surface moisture and pH control were critical to protect coatings or adhesives in designated zones, while maintaining low-VOC, hygienic conditions for food prep and back-of-house areas. Reduced shrinkage and permeability were needed to limit maintenance and callbacks.
What were the results of using E5 at Whole Foods Market?
E5 Nano Silica states that on the Whole Foods Market project in Indianapolis, removing wet curing and topical membranes reduced steps, labor and risk. Crews reported faster access and a denser, harder surface that stands up to retail abrasion, meeting or exceeding owner expectations. Workability gains also supported better finishing.
Who is Whole Foods Market?
Whole Foods Market is a U.S. grocery chain founded in 1980 in Austin, Texas, known for pioneering natural and organic food retail. Amazon acquired it in 2017. As a premium retailer operating high-traffic stores, it requires durable, hygienic and visually consistent surfaces across sales floors, prep spaces and back-of-house areas.
Who is E5 Nano Silica?
E5 Incorporated (E5 Nano Silica) makes nano silica-based concrete admixtures and topical treatments that cure concrete from the inside out. It is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA, and serves ready-mix producers, general contractors, engineers, architects, finishers, developers and government and DOT agencies.
Frequently asked questions
Which E5 products were used at Whole Foods Market in Indianapolis?
E5 Internal Cure was dosed at the batch plant and E5 Catalyst was applied topically during finishing.
How many days did E5 save versus wet curing at Whole Foods?
The case study reports immediate slab access and up to 7 days saved versus wet curing.
Who supplied the concrete and who was the general contractor?
Shelby Materials was the ready-mix producer and Ryan Companies was the general contractor. VTI was the concrete polisher.
Did the project use curing compounds or separate hardeners and sealers?
No. E5 Internal Cure and E5 Catalyst replaced wet curing and eliminated separate curing compounds, hardeners and sealers.
Where is E5 Nano Silica headquartered?
E5 Incorporated is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA.