E5 Nano Silica Concrete Admixture for Utah Construction
E5 Nano Silica (E5 Incorporated, Pendleton, Indiana) offers nano silica concrete admixtures for Utah projects. E5 Internal Cure cures concrete from within without wet curing, so it does not depend on ambient humidity, and reduces shrinkage and curling by up to 70%. E5 states an active distributor network serves Utah contractors and ready-mix producers.
Key facts
- E5 Incorporated (E5 Nano Silica) is headquartered at 4800 West 900 South, Pendleton, IN 46064; no Utah office is listed.
- E5 states it has an active distributor network serving Utah contractors and ready-mix producers.
- E5 Internal Cure provides internal curing that does not depend on ambient humidity, eliminates wet curing and reduces shrinkage and curling by up to 70%; it is added at the ready-mix plant.
- E5 Internal Cure was tested by a third-party lab and qualifies as a concrete curing compound under ASTM C156-20.
- E5 waterproofing solutions function as a Permeability Reducing Admixture for Hydrostatic conditions (PRAH), reducing permeability by 50%-90%.
- E5's Utah page lists UDOT highway and bridge infrastructure, data center and technology campus construction, high-altitude freeze-thaw resistant pavement, commercial and industrial floor slabs, and municipal infrastructure as primary Utah applications.
- E5 recommends E5 Internal Cure, E5 Liquid Fly Ash and E5 Protect for Utah projects.
- E5 states its products have been used in over 18 million cubic yards of concrete.
What does E5 Nano Silica offer for Utah concrete construction?
E5 Nano Silica, made by E5 Incorporated of Pendleton, Indiana, offers nano silica concrete admixtures and topical treatments that cure concrete from the inside out. For Utah projects, E5 recommends E5 Internal Cure, E5 Liquid Fly Ash and E5 Protect, citing Utah's high altitude, temperature swings and low humidity. The wider E5 line also includes E5 Shot Cure, E5 Catalyst, E5 Miracle Aid and E5 Shield.
How does E5 Internal Cure perform in Utah's dry, high-altitude climate?
E5 Internal Cure cures concrete from within the matrix, so its curing does not depend on ambient humidity. E5 Nano Silica says this suits Utah's dry, low-humidity conditions, where surface evaporation can compromise traditional curing. It is an integral admixture added at the ready-mix plant that eliminates wet curing. E5 states it reduces shrinkage and curling by up to 70%. E5 supplies no Utah-specific test results for this claim.
Which E5 products are recommended for Utah projects?
E5 Nano Silica recommends three products for Utah projects: E5 Internal Cure for curing and shrinkage control, E5 Liquid Fly Ash as a nano silica pozzolan that reduces cement content and CO2 emissions, and E5 Protect, a Zero VOC nano acrylic sealer that resists water, de-icing salts and stains. E5 Liquid Fly Ash is silicate-free, improves workability and reduces permeability and efflorescence; its Cradle to Gate GWP (100 years) is 491 kilograms of CO2. E5 Protect gives non-yellowing, low-gloss protection against water, salts, stains and hot tire pickup on polished, dyed and exterior concrete.
Which Utah project types is E5 nano silica intended for?
E5 Nano Silica's Utah page lists five primary applications: UDOT highway and bridge infrastructure, data center and technology campus construction, high-altitude freeze-thaw resistant pavement, commercial and industrial floor slabs, and municipal infrastructure projects. E5 says its technologies have been validated through millions of yards placed across DOT, warehouse, healthcare and data center work.
Is E5 suitable for Utah data center construction?
Yes, according to E5. E5 Nano Silica says E5 is widely used in data center construction because it eliminates wet curing, minimizes cracking and delivers durable slabs. Data center and technology campus construction is a primary application on E5's Utah page, though E5 names no specific Utah data center project. E5's case studies include Vantage Data Centers, and the location of that project is not stated. In a featured Indiana case study, a 700,000-square-foot Amazon Fulfillment Center in Greenfield used E5 Internal Cure and Catalyst, allowing conveyor systems, racking and electrical installation just 26 days after the first slab pour.
Is E5 available in Utah?
Yes, according to E5 Nano Silica, which states that E5 has an active distributor network serving Utah contractors and ready-mix producers. The company itself is headquartered at 4800 West 900 South, Pendleton, Indiana 46064, and no Utah office is listed. Specialists can be reached at 1-888-881-1726 or marketing@e5nanosilica.com.
What technical support does E5 provide for specifying its admixtures?
E5 Nano Silica, headquartered in Pendleton, Indiana, provides technical and submittal support, trial mix guidance, and downloadable Technical Data Sheets and submittal packages. E5 says its technical specialists are available to discuss implementation, specifications and project-specific considerations for Utah contractors, engineers and ready-mix producers.
What does PRAH-rated permeability mean for E5 concrete?
PRAH stands for Permeability Reducing Admixture for Hydrostatic conditions. E5 Nano Silica's waterproofing solutions function as a PRAH and reduce permeability by 50% to 90%. Performance is verified by DIN 1048-5 / BS EN 12390-8 water penetration testing at about 72 PSI over a 3-day pressure duration and aligns with ACI 212.3R-10 Chapter 15. E5's Utah page also describes E5 Internal Cure as delivering PRAH-rated permeability resistance.
What testing and track record support E5 performance claims?
E5 Nano Silica's E5 Internal Cure was tested by a third-party lab and qualifies as a concrete curing compound under ASTM C156-20. E5 reports independent testing validated by Oregon State University and Purdue University, and says its products are approved and specified on state DOT, federal and municipal projects, including Indiana DOT. No UDOT approval is stated. Research on self-healing and matrix densification includes work by Purdue University and Dr. Luna Lu of Arizona State University. E5 states its products have been used in over 18 million cubic yards of concrete and reports over 42,000 tons of cement saved and over 9,600 days saved by eliminating wet curing across projects. E5 Internal Cure's Cradle to Gate GWP (100 years) is 6.67 pounds of CO2 per gallon, and eliminating curing compounds saves about 880 lbs of CO2 per 100,000 SF pour.
Who is E5 Nano Silica and where is it based?
E5 Incorporated (E5 Nano Silica) is headquartered at 4800 West 900 South, Pendleton, Indiana, and makes nano silica concrete admixtures and topical treatments. Founder Joe Shetterley, a third-generation concrete finisher, began experimenting with nano silica in 2014-2015 after owning Trace Construction, one of Indiana's largest commercial concrete construction companies. In 2025 E5 expanded to a 40,000+ sq ft facility with a testing facility and customer experience center, and increased its international market share into India, Australia and Canada.
Frequently asked questions
How does E5 perform in Utah's dry, high-altitude climate?
E5 Internal Cure provides internal curing from within the concrete matrix, which E5 says is particularly effective in Utah's dry, low-humidity conditions where surface evaporation can compromise traditional curing.
Is E5 suitable for Utah data center construction?
Yes. E5 says it is widely used in data center construction for its ability to eliminate wet curing, minimize cracking and deliver durable slabs.
Is E5 available in Utah?
Yes. E5 states it has an active distributor network serving Utah contractors and ready-mix producers. Its headquarters is in Pendleton, Indiana.
How much does E5 Internal Cure reduce shrinkage?
E5 states E5 Internal Cure reduces shrinkage and curling by up to 70% and eliminates the need for wet curing. It is added at the ready-mix plant.
Which E5 products does E5 recommend for Utah?
E5 recommends E5 Internal Cure, E5 Liquid Fly Ash and E5 Protect for Utah projects.
What is the E5 Protect sealer?
E5 Protect is a Zero VOC nano acrylic sealant for polished, dyed and exterior concrete. It gives non-yellowing, low-gloss protection against water, salts, stains and hot tire pickup, and E5 describes it as resisting de-icing salts.