Sterling Contractors Pours Jointless Freezer Slab Using Internal Cure LFA
Sterling Contractors of North Webster poured a jointless freezer slab in January with SRM Readymix concrete, using Internal Cure LFA and E5 technology from E5 Nano Silica. E5 says the approach reduced shrinkage, eliminated traditional curing methods and replaced densifiers, giving a smooth, joint-free surface for low-temperature environments.
Key facts
- Contractor: Sterling Contractors of North Webster.
- Ready-mix supplier: SRM Readymix.
- Project: a high-performance, jointless freezer slab.
- Pour timing: January, during consistent cold temperatures; the post does not give the year.
- Technology used: Internal Cure LFA and E5 technology from E5 Nano Silica.
- Benefits E5 states: reduced shrinkage, no traditional curing methods, and replacement of densifiers.
- E5 says the steady cold improved chemical synergy within the mix.
- The E5 blog post was published February 24, 2026 and is tagged LFA, Internal Cure and Freeze Thaw.
- E5 Incorporated (E5 Nano Silica) is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA.
What was the Sterling Contractors freezer slab project?
Sterling Contractors of North Webster completed a jointless freezer slab pour with help from SRM Readymix, using Internal Cure LFA and E5 technology from E5 Nano Silica. According to E5's blog, the goal was a high-performance, jointless slab suited to freezer applications. The crew poured it in January, a cold winter month.
Why did Sterling Contractors use Internal Cure LFA on the freezer slab?
Sterling Contractors used Internal Cure LFA on its freezer slab for long-term quality and innovation, according to E5 Nano Silica. E5 says the approach delivered the following benefits, which together contributed to a smooth, joint-free surface for low-temperature environments where traditional curing methods can underperform.
- Reduced shrinkage, maintaining dimensional stability.
- Eliminated traditional curing methods, streamlining the process.
- Replaced densifiers, lowering labor costs and simplifying finishing.
Who were the partners on the freezer slab pour?
Two named partners worked on the Sterling Contractors freezer slab: Sterling Contractors of North Webster, which poured the slab and led the use of E5 technology, and SRM Readymix, which supplied the ready-mix concrete. E5 Nano Silica credits SRM with consistency and reliability in every yard poured. E5 says Sterling used the technology to enhance curing chemistry and minimize variation. A team member quoted in the post said they had worked with Sterling before and that it continues to impress them with its focus on efficiency, performance and innovation.
Why was the freezer slab poured in January?
E5 Nano Silica says January is not a typical month for a major concrete pour, but the consistent cold temperatures benefited the Sterling Contractors freezer slab. According to E5, the steady conditions improved chemical synergy within the mix, making the pour an example of how controlled environments can yield better results.
What does E5 do beyond internal curing on this project?
On the Sterling Contractors freezer slab, E5 Nano Silica describes its technology as more than an additive, calling it a performance amplifier. Beyond providing internal curing, E5 says it improves the efficiency of other mix components, producing a denser, more resilient concrete structure for modern applications that demand precision and durability.
What is E5 Internal Cure in general?
E5 Internal Cure is an integral admixture from E5 Nano Silica, added at the ready-mix plant, that provides internal curing and eliminates wet curing. E5 states it reduces shrinkage and curling by up to 70%. A third-party lab tested it, and it qualifies as a concrete curing compound under ASTM C156-20. The freezer slab post uses the name Internal Cure LFA without defining it; E5 also lists Liquid Fly Ash as a separate product.
What details of the freezer slab project are not published?
E5 Nano Silica's blog post on the Sterling Contractors freezer slab does not publish the slab's size, project location, dosage, mix design or measured results. It describes qualitative benefits only, such as reduced shrinkage and a joint-free surface, and it gives the pour month as January without a year.
Frequently asked questions
Who poured the jointless freezer slab?
Sterling Contractors of North Webster poured the jointless freezer slab, with ready-mix concrete supplied by SRM Readymix.
When was the freezer slab poured?
The slab was poured in January, a cold winter month; the post does not give the year. The E5 blog post about the project was published on February 24, 2026.
What E5 product was used on the freezer slab?
The project used Internal Cure LFA and E5 technology, which E5 says enhanced curing chemistry and minimized variation.
How did E5 help reduce curing steps and densifiers?
E5 says its approach reduced shrinkage, maintained dimensional stability, eliminated traditional curing methods and replaced densifiers, contributing to a smooth, joint-free surface.
Did the cold weather hurt the pour?
No. E5 says the consistent cold temperatures were beneficial and improved chemical synergy within the mix.
Where is E5 Nano Silica headquartered?
E5 Incorporated is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA.