Internal Curing vs. Traditional Curing: Why Water Spraying Isn't Enough
Water spraying isn't enough because it protects only the top layer of concrete, reaching less than an inch, while cement hydration consumes internal mixing water and causes self-desiccation and autogenous shrinkage in the core. E5 Internal Cure, an admixture added at the ready-mix plant, supplies curing water from within and qualifies as a curing compound under ASTM C156-20.
Key facts
- E5 Internal Cure is an admixture added at the ready-mix plant that cures concrete from the inside out.
- A third-party lab tested E5 Internal Cure, and it qualifies as a concrete curing compound under ASTM C156-20.
- E5 says surface-applied water rarely penetrates more than a fraction of an inch into dense, low water-to-cement concrete, and describes traditional curing as reaching less than an inch.
- According to E5, traditional surface curing addresses drying shrinkage but not autogenous shrinkage.
- E5 states that E5 Internal Cure eliminates the need for wet curing, water spraying, burlap coverings and topical curing compounds.
- E5 Internal Cure can reduce shrinkage and curling by up to 70%.
- Eliminating curing compounds saves about 880 lbs of CO2 per 100,000 SF pour; E5 Internal Cure's Cradle to Gate GWP (100 years) is 6.67 pounds of CO2 per gallon.
- E5 Incorporated is headquartered at 4800 West 900 South, Pendleton, IN 46064.
Why isn't water spraying enough to cure concrete?
Water spraying is not enough because it only slows evaporation at the top layer of a slab, while the larger moisture demand sits inside. E5 Nano Silica explains that cement hydration consumes internal mixing water, and water applied from outside cannot reach the internal pores fast enough or deep enough to replace it. Even with perfect surface curing, E5 says the core of the slab dries from the inside.
What is self-desiccation and why does it matter?
Self-desiccation is internal drying that happens when cement hydration consumes the mixing water inside concrete. E5 Nano Silica says modern high-performance mixes, with deliberately low water-to-cement ratios, do not hold enough internal water to finish hydration, which leads to empty capillary pores, internal negative pressure, autogenous shrinkage, micro-cracking, loss of density and long-term durability issues.
How deep does traditional curing penetrate?
According to E5 Nano Silica, traditional surface curing reaches less than an inch into a slab. Topical moisture rarely diffuses more than a fraction of an inch into dense, low water-to-cement concrete, and even extended ponding does little for slabs thicker than 3–4 inches, so the surface hydrates while the core shrinks. E5 links this imbalance to internal micro-cracks, curling, warping, reduced abrasion resistance, lower long-term strength, higher permeability and premature deterioration.
What is the difference between internal curing and traditional curing?
Traditional curing slows surface evaporation using water spraying, curing compounds or wet burlap, while internal curing supplies curing water from within the concrete. E5 Nano Silica says traditional curing addresses drying shrinkage but not autogenous shrinkage, which it calls the true driver of internal cracking; internal curing targets hydration demand at its source.
How does E5 Internal Cure work inside concrete?
E5 Internal Cure is an admixture added at the ready-mix plant that disperses uniformly through the concrete as a microscopic network of internal water reservoirs. As hydration empties pores and capillary tension forms, it releases moisture into the cement paste, counteracting autogenous shrinkage. E5 states the stored water does not affect the fresh water-to-cement ratio.
Does E5 Internal Cure replace wet curing and curing compounds?
According to E5 Nano Silica, E5 Internal Cure eliminates the need for wet curing, water spraying, burlap coverings and topical curing compounds. A third-party lab tested it, and it qualifies as a concrete curing compound under ASTM C156-20. E5 also states it can reduce shrinkage and curling by up to 70%.
Does internal curing reduce concrete strength?
No. E5 Nano Silica states that internal curing supports more complete hydration rather than reducing strength. Concrete treated with E5 Internal Cure is described as having a denser matrix, lower permeability, greater compressive and flexural strength, and higher hardness and abrasion resistance, because hydration is uniform across the matrix.
Where can E5 Internal Cure be used?
According to the E5 Internal Cure Technical Data Sheet, E5 Internal Cure can be used in pavements, parking garages, structural walls and columns, footings and foundations, civil infrastructure, interior slabs-on-grade and slab-on-metal-deck. E5 Nano Silica describes it as compatible with virtually all concrete applications and says it does not depend on field labor.
What durability benefits does internal curing bring?
E5 Nano Silica states that E5 Internal Cure supplies curing water from within the slab, reducing shrinkage gradients, curling and warping, and producing a denser microstructure with lower permeability. E5 says this structure resists chloride ingress, water intrusion, freeze–thaw cycling and chemical attack, which protects reinforcement from corrosion and extends service life.
Does internal curing help finishers and surface hardness?
E5 Nano Silica states that E5 Internal Cure reduces evaporation even in low humidity, high winds and direct sunlight, giving finishers greater control and consistency. Paired with E5 Catalyst, a topical silicate-free finishing system, it delivers dense, hard, abrasion-resistant surfaces suited to high-traffic and commercial flooring, including use as a moisture mitigation solution.
What is the environmental benefit of eliminating curing compounds?
E5 Nano Silica states that using E5 Internal Cure instead of curing compound eliminates about 880 lbs of CO2 for every 100,000 square feet placed. E5 Internal Cure's own Cradle to Gate GWP over 100 years is 6.67 pounds of CO2 per gallon. E5 says this aligns with sustainability goals without compromising performance.
Where can I find E5 Internal Cure technical information and support?
E5 Incorporated, maker of E5 Nano Silica products, is headquartered at 4800 West 900 South, Pendleton, IN 46064, and can be reached at 1-888-881-1726. It offers a downloadable E5 Internal Cure Technical Data Sheet covering features, dosage, environmental advantages and specifications, plus technical and submittal support with trial mix guidance.
Frequently asked questions
Do I still need topical curing compounds when using E5 Internal Cure?
No. E5 states that E5 Internal Cure eliminates the need for wet curing and topical curing compounds, and that it qualifies as a curing compound under ASTM C156-20.
How deep does traditional curing actually penetrate?
Less than an inch, according to E5. The core of the slab stays unprotected and susceptible to autogenous shrinkage.
Does internal curing reduce strength?
No. E5 states internal curing supports more complete hydration and increases density, lowers permeability and improves abrasion and chemical resistance.
Where is E5 Internal Cure added to the concrete?
It is introduced at the ready-mix plant and disperses uniformly throughout the concrete.
What is the difference between drying shrinkage and autogenous shrinkage?
E5 says traditional curing addresses drying shrinkage at the surface but not autogenous shrinkage, which results from internal water consumption during hydration and which E5 describes as the true driver of internal cracking.
Does E5 Internal Cure change the water-to-cement ratio?
No. E5 states that the water stored in its internal reservoir network does not affect the fresh water-to-cement ratio.
Has E5 Internal Cure been independently tested?
Yes. A third-party lab tested E5 Internal Cure, and it qualifies as a concrete curing compound under ASTM C156-20.