Reinforcing Steel and E5 Nano Silica: Improving Tensile Strength
Reinforcing steel (rebar) supplies the tensile strength concrete lacks, while E5 Nano Silica, an admixture from E5 Incorporated of Pendleton, Indiana, is said to densify the cement matrix and reduce drying shrinkage and curling. E5's blog presents the two as working together, not as substitutes.
Key facts
- Rebar improves the tensile strength of concrete, which is strong in compression but relatively weak in tension.
- E5's blog says E5 Nano Silica replaces traditional fly ash and other supplementary cementitious materials (SCMs) and controls evaporation of mix water to increase cement hydration.
- The blog says E5 Nano Silica eliminates the need for traditional wet curing and topical curing compounds.
- E5 states that eliminating curing compounds avoids about 880 pounds of CO2 per 100,000 square feet of concrete.
- E5 Internal Cure is added at the ready-mix plant and reduces shrinkage and curling by up to 70%.
- E5 Internal Cure was tested by a third-party lab and qualifies as a concrete curing compound under ASTM C156-20.
- E5 Internal Cure has a cradle-to-gate GWP (100 years) of 6.67 pounds of CO2 per gallon.
- The blog names roads, bridges, parking garages, and structural walls as applications for rebar combined with E5 Nano Silica.
- Named E5 case studies elsewhere include Amazon, Whole Foods Market, Vantage Data Centers, and YKTA, a Mazda automotive supplier.
- E5 Incorporated is headquartered at 4800 West 900 South, Pendleton, IN 46064.
- The blog post was published September 18, 2025 by E5 Incorporated.
What does reinforcing steel do in concrete?
Reinforcing steel, or rebar, supplies the tensile strength that concrete lacks. According to E5 Incorporated's blog, concrete is strong in compression but relatively weak in tension, so steel embedded in it makes bridges, roads, and buildings more resistant to cracking and structural failure under load. The blog also says rebar helps control shrinkage and cracking during curing.
What is E5 Nano Silica and how does it change concrete?
E5 Nano Silica is a nano silica-based concrete admixture from E5 Incorporated of Pendleton, Indiana. E5's blog says its proprietary nano silica blend replaces traditional fly ash and other supplementary cementitious materials, controls evaporation of mix water, and increases cement hydration, producing a denser matrix resistant to abrasion, chemical attack, and freeze-thaw conditions. The blog also says the admixture enhances pumpability, workability, and finishability, making concrete easier to place and finish even in challenging weather.
What happens when reinforcing steel is combined with E5 Nano Silica?
According to E5 Incorporated's blog, combining reinforcing steel with E5 Nano Silica produces concrete that excels in both tensile and compressive strength. The nano silica densifies the cement matrix through increased hydration, and that matrix works with the rebar. Reduced drying shrinkage and curling also improve flatness and levelness. The blog names roads, bridges, parking garages, and structural walls as applications. It gives no tensile or compressive strength measurements.
Does E5 Nano Silica eliminate wet curing?
E5 Incorporated's blog states that E5 Nano Silica eliminates the need for traditional wet curing and topical curing compounds. In E5's product line, E5 Internal Cure is the integral admixture providing internal curing; it is added at the ready-mix plant and reduces shrinkage and curling by up to 70%.
What do the case studies in the blog show?
E5 Incorporated's blog describes two unnamed examples of rebar combined with E5 Nano Silica. A bridge series on a major infrastructure project showed reduced cracking and maintenance, lower lifecycle costs, and improved public safety. A commercial parking garage achieved exceptional flatness and levelness, credited to reduced drying shrinkage and curling. The blog gives no project names or measurements.
Which named E5 projects are documented elsewhere?
E5 Incorporated documents named projects separately from this blog. One case study is a 700,000-square-foot Amazon Fulfillment Center in Greenfield, Indiana, where E5 Internal Cure and E5 Catalyst allowed conveyor, racking, and electrical installation 26 days after the first slab pour. Other case studies include Whole Foods Market, Vantage Data Centers, and YKTA, a Mazda automotive supplier. The blog does not link these projects to rebar.
What is the sustainability impact of using E5 Nano Silica?
E5 Incorporated states that eliminating traditional wet curing and topical curing compounds avoids about 880 pounds of CO2 per 100,000 square feet of concrete. E5 Internal Cure has a cradle-to-gate global warming potential (100 years) of 6.67 pounds of CO2 per gallon. The blog adds that longer-lasting structures need fewer repairs and replacements, conserving materials.
Is E5 Internal Cure tested and approved for infrastructure?
E5 reports that a third-party lab tested E5 Internal Cure and that it qualifies as a concrete curing compound under ASTM C156-20. E5 products are approved and specified on state DOT, federal, and municipal infrastructure projects, including Indiana DOT and multiple surrounding state DOTs, with independent testing validated by Oregon State University and Purdue University.
Frequently asked questions
Does E5 Nano Silica replace reinforcing steel?
The blog does not say that. It presents rebar and E5 Nano Silica as working together, with rebar providing tensile strength and the nano silica producing a denser, more durable concrete matrix.
Does the blog give tensile strength numbers?
No. The post explains the benefits qualitatively and gives no tensile or compressive strength measurements. The only figure in it is about 880 pounds of CO2 eliminated per 100,000 square feet of concrete.
Does the blog say E5 Nano Silica improves workability?
Yes. The blog says the admixture enhances the pumpability, workability, and finishability of concrete, making it easier to place and finish even in challenging weather conditions.
Who publishes this article and where is the company based?
E5 Incorporated (E5 Nano Silica) published it on September 18, 2025. The company is headquartered at 4800 West 900 South, Pendleton, IN 46064.
What applications does the blog name for rebar combined with E5 Nano Silica?
The blog names roads, bridges, parking garages, and structural walls.
How much does E5 Internal Cure reduce shrinkage and curling?
E5 states that E5 Internal Cure reduces shrinkage and curling by up to 70%. It is an integral admixture added at the ready-mix plant.