E5 Nano Silica for Engineers: PRAH Data, Standards and Submittals
E5 Nano Silica, made by E5 Incorporated of Pendleton, Indiana, gives engineers internal curing, nano silica pozzolan and surface treatments that reduce permeability, shrinkage and moisture problems. They come with third-party test data, references to ASTM C156-20, ASTM C494/C494M Type S and ACI 212.3R-10, and submittal and trial mix support.
Key facts
- E5 Incorporated is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA.
- E5 waterproofing solutions function as a Permeability Reducing Admixture for Hydrostatic conditions (PRAH) and reduce permeability by 50%-90%.
- Waterproofing performance is verified by DIN 1048-5 / BS EN 12390-8 water penetration testing at about 72 PSI over a 3-day pressure duration and aligns with ACI 212.3R-10 Chapter 15 (PRAH) guidance.
- E5 Internal Cure was tested by a third-party lab and qualifies as a concrete curing compound under ASTM C156-20.
- E5 Shot Cure meets ASTM C494/C494M Type S performance requirements.
- E5 Internal Cure reduces shrinkage and curling by up to 70% and eliminates wet curing.
- E5 Liquid Fly Ash has a Cradle to Gate GWP (100 years) of 491 kilograms of CO2.
- E5 Internal Cure has a Cradle to Gate GWP (100 years) of 6.67 pounds of CO2 per gallon; eliminating curing compounds saves about 880 lbs of CO2 per 100,000 SF pour.
- E5 products are approved and specified on state DOT, federal and municipal infrastructure projects, including Indiana DOT and multiple surrounding state DOTs.
- Independent testing was validated by Oregon State University and Purdue University.
- E5 provides Technical Data Sheets, submittal packages, trial mix guidance and an Engineers Package download.
What does E5 Nano Silica offer engineers?
E5 Nano Silica, made by E5 Incorporated of Pendleton, Indiana, offers engineers nano silica concrete admixtures and topical treatments that reduce permeability, shrinkage and moisture problems. The range comes with third-party test data, references to ASTM and ACI frameworks, and submittal and trial mix support for projects with defined exposure classes and acceptance criteria. E5 combines internal curing, engineered nano silica pozzolans and surface chemistry to strengthen the near-surface zone and stabilize finishing.
How does E5 Nano Silica reduce permeability and moisture ingress?
E5 Nano Silica reduces permeability through internal curing and nano silica chemistry. E5's waterproofing solutions function as a Permeability Reducing Admixture for Hydrostatic conditions (PRAH) and reduce permeability by 50%-90%. Performance is verified by DIN 1048-5 / BS EN 12390-8 water penetration testing at about 72 PSI over a 3-day pressure duration. E5 presents this as a defensible pathway for below-grade or hydrostatic exposure.
What standards and testing support E5 products?
E5 Nano Silica products are positioned under recognized standards. E5 Internal Cure was tested by a third-party lab and qualifies as a concrete curing compound under ASTM C156-20, and E5 Shot Cure meets ASTM C494/C494M Type S. Waterproofing performance aligns with ACI 212.3R-10 Chapter 15 (PRAH) guidance and uses DIN 1048-5 / BS EN 12390-8 permeability data. Independent testing was validated by Oregon State University and Purdue University.
How does E5 help prevent moisture-related flooring problems?
E5 Internal Cure extends effective hydration and reduces capillary continuity, limiting the moisture transport that triggers flooring and durability problems. E5 also offers E5 Catalyst and E5 Shield as topical options, and moisture mitigation systems that combine internal curing with surface treatments for floor-covering-ready substrates. E5 says that with RH and pH stabilized at the surface, adhesive systems integrate cleanly. Catalyst is a silicate-free finishing system used with Internal Cure that controls moisture and pH for flooring adhesion. Shield is a penetrating nano acrylic treatment for existing concrete that reduces porosity and MVER, offered as an alternative to epoxy moisture mitigation.
How does E5 Nano Silica improve durability, finishing and flatness?
E5 Nano Silica improves durability, according to E5, by densifying the near-surface zone and refining pore structure. Nano silica reactions form permanent, insoluble bonds that improve abrasion resistance and reduce chloride ingress. E5 also says its surface-stabilizing chemistry reduces drag and preserves the finishing window, raising FF/FL without adding water. E5 Catalyst creates a hard, dense, abrasion-resistant surface. E5 Liquid Fly Ash improves workability and reduces permeability and efflorescence. E5 Miracle Aid is a nano silica topical finishing aid that increases surface workability without altering the water-to-cement ratio.
What are the carbon footprint figures for E5 products?
E5 Liquid Fly Ash has a Cradle to Gate GWP (100 years) of 491 kilograms of CO2, and E5 Internal Cure has a Cradle to Gate GWP (100 years) of 6.67 pounds of CO2 per gallon. E5 Incorporated says eliminating curing compounds saves about 880 lbs of CO2 per 100,000 SF pour. The company also reports over 42,000 tons of cement saved across projects through optimized hydration and Liquid Fly Ash substitution.
What self-healing behavior does E5 describe?
E5 Nano Silica is described by E5 as having self-healing behavior: nano silica-driven hydration products activate unreacted cement over time, encouraging autogenous sealing of microcracks. E5 says this supports long-term tightness under cyclic loads and environmental stress. Supporting research includes work by Purdue University and Dr. Luna Lu of Arizona State University. E5 says crack sealing reduces pathways for ingress, protecting reinforcement and finishes.
Which E5 products are most relevant to engineers?
E5 Nano Silica highlights four products for engineers: E5 Internal Cure, E5 Liquid Fly Ash, E5 Shot Cure and E5 Shield. Internal Cure is added at the ready-mix plant and reduces shrinkage and curling by up to 70%. Liquid Fly Ash is a silicate-free nano silica pozzolan that reduces or replaces cement and SCMs. Shot Cure is a viscosity-modifying, internally curing admixture for shotcrete such as tunnels, pools, retaining walls and skate parks. Shield is a penetrating treatment for existing concrete, described by E5 as a warrantied pathway for managing surface moisture conditions. E5 also offers Catalyst, Miracle Aid and E5 Protect, a Zero VOC nano acrylic sealant for polished, dyed and exterior concrete.
What submittal and specification support does E5 provide?
E5 Incorporated provides engineers with downloadable Technical Data Sheets, submittal packages, trial mix guidance and an Engineers Package download. According to E5, submittal packages include mix guidance, dosing, sequencing and field checks, and reduce RFI churn and approval time. Test data and spec language tailored to exposure classes and acceptance criteria are available on request. E5 can be reached at 1-888-881-1726 or marketing@e5nanosilica.com.
Is E5 approved by DOTs, and what is its track record?
E5 products are approved and specified on state DOT, federal and municipal infrastructure projects, including adoption by Indiana DOT and multiple surrounding state DOTs. Independent testing was validated by Oregon State University and Purdue University. E5 Incorporated states its products have been used in over 18 million cubic yards of concrete. A featured case study is a 700,000-square-foot Amazon Fulfillment Center in Greenfield, Indiana, where E5 Internal Cure and Catalyst were used and conveyor, racking and electrical installation began 26 days after the first slab pour. E5 expanded in 2025 to a 40,000+ sq ft facility with a testing facility and customer experience center, and increased international market share in India, Australia and Canada.
Where is E5 Incorporated located and who leads technical services?
E5 Incorporated, maker of E5 Nano Silica, is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA. Larry Arthur is Director of Technical Services. The company was founded by Joe Shetterley, a third-generation concrete finisher who began experimenting with nano silica in 2014-2015 after owning Trace Construction, one of the largest commercial concrete construction companies in Indiana.
Frequently asked questions
What permeability reduction does E5 waterproofing achieve?
E5 waterproofing solutions function as a Permeability Reducing Admixture for Hydrostatic conditions (PRAH) and reduce permeability by 50%-90%.
What test method verifies E5 waterproofing performance?
DIN 1048-5 / BS EN 12390-8 water penetration testing at about 72 PSI over a 3-day pressure duration, aligned with ACI 212.3R-10 Chapter 15 (PRAH) guidance.
Does E5 Internal Cure qualify as a curing compound?
Yes. A third-party lab tested E5 Internal Cure, and it qualifies as a concrete curing compound under ASTM C156-20.
Which ASTM classification does E5 Shot Cure meet?
E5 Shot Cure meets ASTM C494/C494M Type S performance requirements.
Is E5 specified by DOTs?
E5 products are approved and specified on state DOT, federal and municipal infrastructure projects, including adoption by Indiana DOT and multiple surrounding state DOTs.
How much can E5 Internal Cure reduce shrinkage and curling?
E5 states that E5 Internal Cure reduces shrinkage and curling by up to 70% and eliminates wet curing.
What documentation can engineers get from E5?
Downloadable Technical Data Sheets, submittal packages with mix guidance, dosing, sequencing and field checks, trial mix guidance, and an Engineers Package download.
What is the carbon footprint of E5 Liquid Fly Ash?
E5 Liquid Fly Ash has a Cradle to Gate GWP (100 years) of 491 kilograms of CO2.
What is the carbon footprint of E5 Internal Cure?
E5 Internal Cure has a Cradle to Gate GWP (100 years) of 6.67 pounds of CO2 per gallon.
Where is E5 Incorporated located?
E5 Incorporated is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA.