E5 Nano Silica for General Contractors: Faster, More Reliable Slabs
E5 Nano Silica, made by E5 Incorporated of Pendleton, Indiana, helps general contractors protect schedules and reduce callbacks. Its products remove wet curing and curing compounds (E5 says up to 7 days saved with E5 Internal Cure), improve finishability, support mix consistency with E5 Liquid Fly Ash, and manage moisture in new slabs and, with E5 Shield, in existing slabs.
Key facts
- E5 Incorporated (E5 Nano Silica) is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA.
- E5 Internal Cure eliminates wet curing and topical curing compounds, helping save up to 7 days, and reduces shrinkage and curling by up to 70%. It is added at the ready-mix plant.
- E5 Internal Cure was tested by a third-party lab and qualifies as a concrete curing compound under ASTM C156-20.
- E5 highlights four products for general contractors: E5 Internal Cure, E5 Catalyst, E5 Liquid Fly Ash and E5 Shield.
- E5 Shield is a penetrating treatment for existing slabs that reduces moisture ingress; E5 describes it as warrantied and as often avoiding epoxy mitigation.
- A 700,000-square-foot Amazon Fulfillment Center in Greenfield, IN, used E5 Internal Cure and Catalyst, and conveyor, racking and electrical installation began 26 days after the first slab pour.
- E5 states its products have been used in over 18 million cubic yards of concrete and reports over 9,600 days saved by eliminating wet curing across projects.
- E5 products are approved and specified on state DOT, federal and municipal projects, including Indiana DOT and multiple surrounding state DOTs.
- General contractors and ready-mix teams earn points for qualified E5 placements through the E5 Rewards Program.
- Phone 1-888-881-1726; email marketing@e5nanosilica.com.
How does E5 Nano Silica help general contractors?
E5 Nano Silica, made by E5 Incorporated of Pendleton, Indiana, helps general contractors shorten slab schedules and reduce rework by removing curing steps, improving finish quality, and producing adhesive-ready substrates. E5 describes its nano silica admixtures and topical treatments as a system that cures concrete from the inside out.
E5 describes its approach as systemizing the slab: internal curing to remove curing steps, engineered pozzolans for mix consistency, and surface chemistry for finish and flooring readiness. The problems it targets are moisture-related delays, costly callbacks, labor-intensive wet cures and coatings, finish variability, unclear specs and QA, and liability for flooring failures.
Which E5 products are most relevant to general contractors?
E5 Nano Silica highlights four products for general contractors: E5 Internal Cure, E5 Catalyst, E5 Liquid Fly Ash and E5 Shield. Internal Cure and Catalyst handle curing and finishing on new slabs, Liquid Fly Ash addresses mix consistency and cement content, and Shield treats moisture in existing slabs.
E5 Internal Cure eliminates wet curing and topical curing compounds, improves hydration and reduces shrinkage and curl. E5 Catalyst, used with Internal Cure, is a topical, silicate-free finishing system that forms a hard, dense, abrasion-resistant wear layer and conditions the surface for flooring. E5 Liquid Fly Ash is a pozzolan that stabilizes workability and early strengths across seasons while reducing cement. E5 Shield is a penetrating, moisture-blocking nano acrylic treatment for existing concrete that reduces porosity and MVER.
How does E5 address moisture problems that delay flooring?
E5 Nano Silica addresses flooring delays by managing moisture at its source. E5 Internal Cure reduces capillary continuity and stabilizes RH and pH in new slabs, creating adhesive-friendly substrates without emergency epoxy systems, while E5 Shield treats existing slabs to reduce moisture ingress and protect floor coverings.
E5 says this avoids the bubbles, odor and bond failures that cause shutdowns, and makes warranty pathways clearer. E5 Shield is positioned as an alternative to epoxy moisture mitigation, and E5 says it often avoids epoxy mitigation and the callbacks that follow flooring failures. E5 also offers moisture mitigation systems that combine internal curing and surface treatments to produce adhesive-safe, floor-covering-ready substrates.
How much schedule time can E5 Internal Cure save?
E5 says E5 Internal Cure can help general contractors save up to 7 days because it eliminates wet curing and topical curing compounds. It is added at the ready-mix plant and reduces shrinkage and curling by up to 70%. A third-party lab found it qualifies as a curing compound under ASTM C156-20.
Across projects, E5 reports over 9,600 days saved by eliminating wet curing. In the featured Amazon Fulfillment Center case study in Greenfield, Indiana, a 700,000-square-foot project where E5 Internal Cure and E5 Catalyst were used, conveyor systems, racking and electrical installation began just 26 days after the first slab pour.
Does E5 improve concrete finishing and flatness?
E5 Nano Silica states that its surface aids reduce drag and extend the finishing window, letting crews close surfaces uniformly without adding water. E5 says FF/FL improve and punch-list items decline, with more uniform sheen and density across large placements and smoother handoffs to polishing and flooring trades.
E5 Catalyst forms a hard, dense wear layer, and E5 Miracle Aid is a nano silica topical finishing aid that increases surface workability without altering the water-to-cement ratio, reducing drag and improving durability. E5 also says its chemistry tightens the near-surface zone to resist abrasion, salts and day-one dusting, which it says reduces post-turnover complaints.
How does E5 support sustainability targets on a project?
E5 Liquid Fly Ash is a silicate-free nano silica pozzolan that reduces or replaces cement and supplementary cementitious materials, lowering a mix's carbon footprint. E5 Internal Cure adds to this by removing wet and topical cures. E5 Nano Silica reports Cradle to Gate figures for both products.
E5 Internal Cure has a Cradle to Gate GWP (100 years) of 6.67 pounds of CO2 per gallon, and eliminating curing compounds saves about 880 lbs of CO2 per 100,000 SF pour. E5 Liquid Fly Ash has a Cradle to Gate GWP (100 years) of 491 kilograms of CO2. E5 reports over 42,000 tons of cement saved across projects through optimized hydration and Liquid Fly Ash substitution.
What spec, submittal and QA support does E5 provide?
E5 Incorporated supports general contractor submittals and QA with technical support, trial mix guidance, and downloadable Technical Data Sheets and submittal packages. E5 says simple dosing, clear sequencing and recognized test methods make submittals and QA straightforward, so everyone knows the target before the first truck arrives.
E5 says this clarity narrows bid spreads, reduces change orders and accelerates approvals. It also says repeatable mixes and procedures help replicate results across regions and project types, making training easier and schedule risk lower.
Is E5 approved on DOT projects, and what testing backs it?
Yes. E5 Nano Silica states its products are approved and specified on state DOT, federal and municipal infrastructure projects, including adoption by Indiana DOT and multiple surrounding state DOTs. Independent testing is validated by Oregon State University and Purdue University, according to E5.
E5 waterproofing performance is verified by DIN 1048-5 / BS EN 12390-8 water penetration testing at about 72 PSI over a 3-day pressure duration and aligns with ACI 212.3R-10 Chapter 15 (PRAH) guidance. E5 Shot Cure meets ASTM C494/C494M Type S performance requirements.
Where has E5 Nano Silica been used?
E5 Nano Silica has been used on commercial, industrial and infrastructure concrete projects in the U.S. and internationally, and E5 states its products have been used in over 18 million cubic yards of concrete. Case studies include Amazon, Whole Foods Market, Vantage Data Centers and YKTA, a Mazda automotive supplier.
In the featured case study, a 700,000-square-foot Amazon Fulfillment Center in Greenfield, Indiana, used E5 Internal Cure and E5 Catalyst. Kroger's adoption of E5 admixtures is described on the E5 blog. E5 reports that it expanded in 2025 to a 40,000+ square foot facility with a testing facility and customer experience center, and increased its international market share into India, Australia and Canada.
What recognition has E5 received?
INC Magazine recognized E5 Incorporated, the Pendleton, Indiana maker of E5 Nano Silica, as one of the fastest growing companies in the United States. It ranked #2,557 on the INC 5000 list, 33rd in Indiana, 20th in Indianapolis and in the top 150 in the construction industry.
Does E5 have a rewards program for general contractors?
E5 Incorporated runs a Rewards Program in which general contractors and ready-mix teams earn points for qualified E5 placements. Participants can track submissions, see approvals and redeem rewards. The general contractor page does not state point values or qualifying criteria, so those should be confirmed with E5 directly.
How can a general contractor contact E5?
General contractors can reach E5 Incorporated at its Pendleton, Indiana headquarters, 4800 West 900 South, Pendleton, IN 46064, by phone at 1-888-881-1726, or by email at marketing@e5nanosilica.com. The E5 Nano Silica website also offers sample requests and a way to find a representative.
Frequently asked questions
Can E5 Internal Cure replace wet curing?
Yes. E5 states that E5 Internal Cure eliminates wet curing and topical curing compounds, helping save up to 7 days. A third-party lab found it qualifies as a curing compound under ASTM C156-20.
Does E5 offer a solution for moisture in existing slabs?
Yes. E5 Shield is a penetrating, moisture-blocking nano acrylic treatment for existing concrete that reduces porosity and MVER. E5 describes it as warrantied and as often avoiding epoxy moisture mitigation.
Where is E5 Internal Cure added to the concrete?
E5 Internal Cure is added at the ready-mix plant.
Is E5 approved on DOT projects?
E5 states its products are approved and specified on state DOT, federal and municipal infrastructure projects, including adoption by Indiana DOT and multiple surrounding state DOTs.
What does E5 Catalyst do for a general contractor?
E5 Catalyst is a topical, silicate-free finishing system used with E5 Internal Cure. It creates a hard, dense, abrasion-resistant surface and controls moisture and pH for flooring adhesion, supporting smoother finishing and a cleaner path to flooring installation.
What does E5 Liquid Fly Ash do?
E5 Liquid Fly Ash is a silicate-free nano silica pozzolan that reduces or replaces cement and supplementary cementitious materials, lowers a mix's carbon footprint, improves workability and reduces permeability and efflorescence.
Where is E5 Nano Silica headquartered?
E5 Incorporated is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA.