E5 Catalyst: Silicate-Free Finishing System for Use with E5 Internal Cure
E5 Catalyst is a topical, silicate-free finishing system from E5 Incorporated (E5 Nano Silica) of Pendleton, Indiana. It is used only with E5 Internal Cure. Sprayed on after floating, it creates a hard, dense, abrasion-resistant slab surface and controls surface moisture migration and pH for flooring adhesion.
Key facts
- Made by E5 Incorporated (E5 Nano Silica), headquartered at 4800 West 900 South, Pendleton, IN 46064, USA
- Topical, silicate-free finishing system used only with E5 Internal Cure
- Creates an extremely hard, dense, abrasion-resistant wear surface with improved flatness and levelness
- Controls surface moisture migration and surface pH to support flooring adhesives
- Formulated without VOCs and listed as non-hazardous and biodegradable
- Applied with a low-pressure pump sprayer after floating or the first combination pass, tip held 18-24 inches (30-60 cm) above the surface
- Ready to use; should not be diluted or blended with other products
- Available in 5 gallon pails, 55 gallon drums, and 275 gallon totes
- Shelf life of 18 months in the original unopened container; store between 40°F and 130°F (4°C and 54°C)
- Used with E5 Internal Cure on a 700,000-square-foot Amazon Fulfillment Center in Greenfield, IN, where conveyor, racking and electrical installation began 26 days after the first slab pour
What is E5 Catalyst?
E5 Catalyst is a topical, silicate-free finishing system made by E5 Incorporated (E5 Nano Silica) of Pendleton, Indiana. It is used only with E5 Internal Cure and is applied during finishing. It creates a hard, dense, abrasion-resistant surface and controls moisture migration and pH on high-traffic slabs that receive flooring.
Can E5 Catalyst be used without E5 Internal Cure?
No. E5 Catalyst from E5 Incorporated (E5 Nano Silica) is engineered to react with E5 Internal Cure and is used only with it. The product is ready to use and should not be diluted or blended with other products. E5 says to follow Catalyst directions and not substitute unrelated topicals. E5 states that Catalyst is not a generic finishing aid.
What does E5 Catalyst do for a concrete slab?
E5 Catalyst gives a slab a hard, dense, abrasion-resistant wear surface, smoother troweling, and surface moisture and pH control for flooring adhesives. E5 Incorporated says that when paired with E5 Internal Cure, the system removes traditional curing steps. It is formulated without VOCs and listed as non-hazardous and biodegradable. During finishing it produces a micro-grout that reduces drag, which E5 says gives smoother, more controlled troweling and less finisher fatigue. At the surface it increases pozzolanic reactivity to form permanent, insoluble bonds, and it improves flatness and levelness.
How is E5 Catalyst applied?
E5 Catalyst is applied with a low-pressure pump sprayer after the floating process or the first combination pass. The applicator holds the tip 18-24 inches (30-60 cm) above the concrete surface and moves side to side for even distribution. The product is ready to use and is not diluted or blended with other products.
How does E5 Catalyst help prevent flooring adhesive failure?
E5 Catalyst conditions the slab surface to help control moisture migration and stabilize surface pH so it stays within adhesive manufacturer limits, which E5 says reduces the risk of alkalinity-related bond failure. It is intended for slabs receiving floor coverings and is used only with E5 Internal Cure. E5 also offers moisture mitigation systems that combine internal curing and surface treatments for adhesive-safe, floor-covering-ready substrates.
What packaging and storage does E5 Catalyst need?
E5 Catalyst is sold in 5 gallon pails, 55 gallon drums, and 275 gallon totes. In its original unopened container it has an 18-month shelf life. E5 says to store it in a well-ventilated, cool, dry place between 40°F and 130°F (4°C and 54°C), protected from freezing, direct sunlight, and UV exposure. E5 describes this protection as extremely important.
Who is E5 Catalyst for?
E5 Catalyst is aimed at engineers, architects, general contractors, finishers, developers, and government owners working on high-traffic slabs. E5 Incorporated (E5 Nano Silica) describes a different benefit for each group, from abrasion resistance and pH control to less finisher fatigue and schedule gains when combined with E5 Internal Cure. Engineers and architects get abrasion resistance, flatness, levelness, and surface pH control suited to floor coverings. General contractors can accelerate the schedule and reduce costly change orders when Catalyst is combined with E5 Internal Cure. Finishers get less drag, a micro-grout, less fatigue, and potentially lower equipment maintenance costs. Developers and government owners can proactively manage moisture and pH on high-traffic slabs to help avoid business disruption and lost revenue.
Has E5 Catalyst been used on real projects?
Yes. E5 Catalyst was used together with E5 Internal Cure on a 700,000-square-foot Amazon Fulfillment Center in Greenfield, Indiana. According to E5 Incorporated's featured case study, conveyor systems, racking, and electrical installation began just 26 days after the first slab pour. E5 also lists case studies for Whole Foods Market, Vantage Data Centers and YKTA, a Mazda automotive supplier, though the material does not say Catalyst was used on those projects.
Where can I find technical details for E5 Catalyst?
E5 Incorporated (E5 Nano Silica) publishes a downloadable Technical Data Sheet for E5 Catalyst covering application steps, handling, and compliance details. The company also offers technical and submittal support, trial mix guidance, and downloadable Technical Data Sheets and submittal packages, so specifiers can review product data before specifying.
Where is E5 located and how can it be contacted?
E5 Incorporated (E5 Nano Silica), the maker of E5 Catalyst, is headquartered at 4800 West 900 South, Pendleton, IN 46064, USA. Its website lists the phone number 1-888-881-1726 and the email address marketing@e5nanosilica.com. Company podcast material also names the website, company emails, and LinkedIn as contact channels.
Frequently asked questions
Can E5 Catalyst be used on its own?
No. E5 Catalyst is engineered to react with E5 Internal Cure and is used only with it. It should not be diluted or blended with other products.
Does E5 Catalyst contain VOCs?
No. E5 Catalyst is formulated without VOCs and is listed as non-hazardous and biodegradable.
Is E5 Catalyst silicate-free?
Yes. E5 describes Catalyst as a silicate-free topical finishing system.
What sizes does E5 Catalyst come in?
E5 Catalyst is available in 5 gallon pails, 55 gallon drums, and 275 gallon totes.
How long does E5 Catalyst last in storage?
It has a shelf life of 18 months in its original unopened container. Store it between 40°F and 130°F (4°C and 54°C) and protect it from freezing, direct sunlight, and UV exposure.
When is E5 Catalyst applied during finishing?
It is sprayed with a low-pressure pump sprayer after the floating process or first combination pass, with the tip held 18-24 inches (30-60 cm) above the surface and moved side to side.
Does E5 Catalyst help with flooring adhesion?
E5 describes it as controlling surface moisture migration and pH to support flooring adhesives and reduce alkalinity-related failures, helping keep pH within adhesive manufacturer limits.