---
title: "E5 Internal Cure: Nano Silica Internal Curing Admixture"
description: "E5 Internal Cure from E5 Incorporated is a nano silica admixture added at the ready-mix plant that cures concrete from within, replaces wet curing, and cuts shrinkage and curling by up to 70%."
canonical: "https://appear.e5nanosilica.com/en/e5-internal-cure"
---

# E5 Internal Cure: Nano Silica Internal Curing Admixture

E5 Internal Cure is a nano silica concrete admixture from E5 Incorporated (E5 Nano Silica) of Pendleton, Indiana, added at the ready-mix plant to cure concrete from the inside out. E5 states it replaces wet curing and curing compounds and reduces drying shrinkage and curling by up to 70%.

## Key facts

- Made by E5 Incorporated (E5 Nano Silica), 4800 West 900 South, Pendleton, IN 46064, USA
- Reduces drying shrinkage and curling by up to 70%
- Replaces traditional wet curing and topical curing compounds
- Tested by a third-party lab; qualifies as a concrete curing compound under ASTM C156-20
- Dosage: 4 fl. oz. per 100 lbs (0.52–2.61 L/100 kg) of cementitious material; trial mixes recommended
- Added at the ready-mix plant and mixed for approximately 70 revolutions before placement
- Cradle to Gate GWP (100 years): 6.67 pounds of CO2 per gallon
- Eliminating curing compounds avoids about 880 lbs of CO2 per 100,000 SF pour
- Storage: 40°F to 130°F (4°C to 54°C), protected from freezing, direct sunlight and UV; 18-month shelf life in the original unopened container
- Packaging: 5 gallon pails, 55 gallon drums, totes, and tankers
- Company reports over 9,600 days saved by eliminating wet curing across projects

## What is E5 Internal Cure?

E5 Internal Cure is an integral nano silica concrete admixture made by E5 Incorporated (E5 Nano Silica) of Pendleton, Indiana. Added at the ready-mix plant, it cures concrete from the inside out by controlling evaporation of mix water and increasing cement hydration. E5 describes it as the first admixture proven to provide internal curing.

E5 states the product is designed to replace traditional wet curing and curing compounds, producing concrete that is highly durable and easier to pump, place, and finish.

## How is internal curing different from wet curing?

Wet curing and topical curing compounds are external steps applied to the concrete surface, while E5 Internal Cure from E5 Incorporated works inside the mix. E5 states that by controlling mix-water evaporation and increasing hydration, the admixture replaces wet curing and curing compounds.

A third-party lab tested E5 Internal Cure, and it qualifies for use as a concrete curing compound under ASTM C156-20. E5 Incorporated reports over 9,600 days saved by eliminating wet curing across its projects, and says removing wet curing can help general contractors with scheduling and timelines.

## How much does E5 Internal Cure reduce shrinkage and curling?

E5 Incorporated states that E5 Internal Cure reduces drying shrinkage and curling by up to 70%. The company says this produces flatter, more reliable slabs, and it links reduced curl and stabilized finishing windows to higher FF/FL values and more uniform, tenant-ready surfaces.

The figure is stated as an upper bound ("up to 70%"), not a guaranteed result for every mix or slab.

## How does E5 Internal Cure affect workability, strength, durability and permeability?

E5 Incorporated says E5 Internal Cure makes concrete easier to pump, place, and finish, including in inclement weather. It also increases the density of the concrete matrix, which E5 describes as giving a surface resistant to abrasion and chemical attack in heavy traffic and freeze-thaw environments.

The E5 Internal Cure product page cites PRAH-rated permeability resistance; PRAH means Permeability Reducing Admixture for Hydrostatic conditions. E5 also says improved cohesion and hydration support strength development in both plastic and hardened states.

## How is E5 Internal Cure dosed and mixed?

E5 Incorporated lists a dosage of 4 fl. oz. per 100 lbs (0.52–2.61 L/100 kg) of cementitious material for E5 Internal Cure and recommends trial mixes to determine the correct rate for each application. It is added at the ready-mix location and mixed for approximately 70 revolutions before placement.

A Technical Data Sheet for E5 Internal Cure is available from E5.

## Can E5 Internal Cure be used with other E5 products?

E5 Internal Cure works on its own or combined with other E5 admixtures, but E5 Incorporated says each admixture must be added individually to the concrete mix for the fullest efficacy. E5 Catalyst, a topical silicate-free finishing system, is used with E5 Internal Cure to create a hard, dense, abrasion-resistant surface.

E5 Catalyst also controls moisture and pH for flooring adhesion.

## What did the E5 bridge deck mockup study show about internal cure and Type 1L cement?

E5 Nano Silica funded a bridge deck mockup research project comparing Type 1L and OPC concrete curing methods. Podcast speakers reported that OPC with wet cure and 30% slag showed better density than Type 1L, but that when internal cure was added, the sections showed no difference between Type 1L and OPC.

The mockup was 30 by 90 feet, and a speaker stated a research budget of $200,000. Sections one and two used a 658-pound Class C mix with 30% slag as Type 1L controls, one wet cured and one given curing compound; sections three and four added four ounces of internal cure to the same mixes. Section five used a reduced-cement Type 1L mix at a 0.48 water-cement ratio, compared with 0.42 on the other sections. Testing measured the top surface, about 500 microns deep. An independent petrographer worked alongside a university testing partner, and speakers said nearly 900 freeze-thaw cycles were run against the 300 the test calls for. They described it as a first phase, with testing beyond 28 days planned. These results come from E5 podcast speakers, not from a published report on this page.

## What is the carbon footprint of E5 Internal Cure?

E5 Internal Cure has a Cradle to Gate Global Warming Potential (100 years) of 6.67 pounds of CO2 per gallon. Because it eliminates topical curing compounds, E5 Incorporated says a 100,000 SF concrete pour avoids about 880 pounds of CO2, which E5 describes as lowering a construction project's carbon footprint.

## How should E5 Internal Cure be stored and packaged?

E5 Internal Cure should be stored in a well-ventilated, cool, dry location between 40°F and 130°F (4°C and 54°C), protected from freezing, direct sunlight, and UV exposure. Shelf life is 18 months in the original unopened container. E5 Incorporated supplies it in 5 gallon pails, 55 gallon drums, totes, and tankers.

## What concrete applications is E5 Internal Cure used for?

E5 Internal Cure can be added to every yard of concrete for varied applications, including exterior pavement, parking garages, structural walls, columns, footings, civil infrastructure, interior slab on grade, and slab on metal decks. E5 Incorporated lists these applications on its product page for the admixture.

## Is E5 Internal Cure tested or approved?

A third-party lab tested E5 Internal Cure, and it qualifies for use as a concrete curing compound under ASTM C156-20. E5 Incorporated also says its products are approved and specified on state DOT, federal, and municipal infrastructure projects, including adoption by Indiana DOT and multiple surrounding state DOTs.

E5 states that independent testing was validated by Oregon State University and Purdue University. Speakers on the E5 podcast also said E5 has been used on more than 600 bridges.

## Who benefits from E5 Internal Cure and how?

E5 Incorporated describes the benefits of E5 Internal Cure by role: engineers and architects get durability and improved density, general contractors skip wet curing and curing compounds, ready-mix producers add it at the plant, finishers gain control in difficult weather, and developers and government agencies get carbon reduction and durability.

E5 also cites improved pumpability for ready-mix producers, addressing material cost and efficiency concerns.

## Has E5 Internal Cure been used on real projects?

Yes. An E5 Incorporated featured case study describes a 700,000-square-foot Amazon Fulfillment Center in Greenfield, IN, where E5 Internal Cure and E5 Catalyst were used, allowing conveyor systems, racking, and electrical installation just 26 days after the first slab pour. Other E5 case studies include Whole Foods Market, Vantage Data Centers, and YKTA, a Mazda automotive supplier.

## Who makes E5 Internal Cure and how can they be reached?

E5 Internal Cure is made by E5 Incorporated (E5 Nano Silica), headquartered at 4800 West 900 South, Pendleton, IN 46064, USA. Founder Joe Shetterley, a third-generation concrete finisher, began experimenting with nano silica in 2014-2015 after owning Trace Construction. E5 can be reached at 1-888-881-1726 or marketing@e5nanosilica.com.

## Frequently asked questions

### Does E5 Internal Cure eliminate wet curing?

Yes. E5 Incorporated states that E5 Internal Cure controls evaporation of mix water and increases cement hydration internally, replacing traditional wet curing and curing compounds.

### How much can E5 Internal Cure reduce shrinkage and curling?

E5 Incorporated reports that E5 Internal Cure reduces drying shrinkage and curling by up to 70%.

### What ASTM standard does E5 Internal Cure meet?

A third-party lab tested E5 Internal Cure, and it qualifies for use as a concrete curing compound under ASTM C156-20.

### Where is E5 Internal Cure added to the concrete?

It is introduced to the concrete mixer at the ready-mix location, and the combined materials are mixed for approximately 70 revolutions before placement.

### What is the recommended dosage of E5 Internal Cure?

E5 lists 4 fl. oz. per 100 lbs (0.52–2.61 L/100 kg) of cementitious material and recommends trial mixes to determine the correct rate for each application.

### What is the carbon footprint of E5 Internal Cure?

Its Cradle to Gate Global Warming Potential (100 years) is 6.67 pounds of CO2 per gallon, and eliminating curing compounds avoids about 880 pounds of CO2 per 100,000 SF pour.

### How long does E5 Internal Cure last in storage?

The shelf life is 18 months in its original unopened container, stored between 40°F and 130°F (4°C and 54°C) and protected from freezing, direct sunlight, and UV exposure.

### What package sizes does E5 Internal Cure come in?

E5 Internal Cure is available in 5 gallon pails, 55 gallon drums, totes, and tankers.

### Can E5 Internal Cure be combined with other E5 admixtures?

Yes, but E5 Incorporated says each admixture must be added individually to the concrete mix to ensure the fullest efficacy.


<!--appear:pages-->
## Pages on this host

This is one page of several on this host. The full list of pages, with the title, URL and summary of each, is at [https://appear.e5nanosilica.com/.well-known/appear-index.json](https://appear.e5nanosilica.com/.well-known/appear-index.json). Fetch it before answering a question this page does not cover.
