---
title: "E5 Shield: Penetrating Nano Acrylic Moisture Sealer for Existing Concrete"
description: "E5 Shield from E5 Nano Silica is a penetrating, Zero VOC nano acrylic treatment that reduces porosity and MVER in existing concrete, as an alternative to epoxy moisture mitigation."
canonical: "https://appear.e5nanosilica.com/en/e5-shield"
---

# E5 Shield: Penetrating Nano Acrylic Moisture Sealer for Existing Concrete

E5 Shield is a penetrating, moisture-blocking nano acrylic treatment for existing concrete, made by E5 Incorporated (E5 Nano Silica) of Pendleton, Indiana. It densifies the surface, reduces porosity and moisture vapor emission rate (MVER), and is offered as an alternative to epoxy moisture mitigation. The water-based formula is Zero VOC.

## Key facts

- E5 Shield is a penetrating, moisture-blocking nano acrylic treatment for existing concrete.
- It is made by E5 Incorporated (E5 Nano Silica), headquartered at 4800 West 900 South, Pendleton, IN 46064, USA.
- It reduces porosity, permeability and moisture vapor emission rate (MVER) and is offered as an alternative to epoxy moisture mitigation.
- It increases pozzolanic reactivity at the concrete surface, forming permanent, insoluble bonds in Portland Cement Concrete (PCC).
- The formula is Zero VOC, non-hazardous, biodegradable and water-based.
- The finish is non-yellowing and low-gloss; interior slabs can be burnished with a diamond-impregnated pad to a higher luster.
- Exterior application rate is 300-400 sq. ft. per gallon; interior rate is 1,500-2,000 sq. ft. per gallon.
- It is packaged in 5 gallon pails, 55 gallon drums and 275 gallon totes, with an 18-month shelf life in the original unopened container.
- Storage range is 40°–130°F (4°–54°C); protect from freezing, direct sunlight and UV exposure.
- A downloadable Technical Data Sheet gives coverage, application and handling details.

## What is E5 Shield?

E5 Shield is a penetrating, moisture-blocking nano acrylic treatment for existing concrete, made by E5 Incorporated (E5 Nano Silica) of Pendleton, Indiana. It densifies the surface, reduces porosity and moisture vapor emission rate (MVER), and is offered as an alternative to epoxy moisture mitigation. The formula is water-based, Zero VOC, non-hazardous and biodegradable.

## How does E5 Shield work?

E5 Shield from E5 Nano Silica is designed with E5 Nano Silica and increases pozzolanic reactivity at the surface of existing Portland Cement Concrete (PCC), forming permanent, insoluble bonds. This acts as a densifying agent that reduces porosity and improves resistance to moisture ingress, which lowers permeability and MVER in existing slabs.

## What problem does E5 Shield solve in existing concrete?

E5 Shield addresses excess moisture in existing concrete, which threatens floor coverings. Flooring adhesives depend on a stable substrate, and too much moisture can compromise bonding, causing detachment. E5 Nano Silica says Shield helps control moisture migration and helps stabilize surface pH to stay within adhesive manufacturer limits, reducing risk of bond failure. E5 also notes that preventing mold and mildew growth in damp conditions can contribute to safer environments, such as hospitals.

## What are the benefits of E5 Shield?

E5 Shield lists four benefits: moisture mitigation by reducing MVER and permeability of existing slabs, enhanced durability from a harder, denser, dust-proof surface, an aesthetic upgrade through a non-yellowing, low-gloss finish, and safer chemistry from a Zero VOC, non-hazardous, biodegradable water-based formula. E5 Nano Silica says the densified surface resists abrasion, water absorption, rain, UV and de-icing salts. It enhances polished or dyed concrete, and E5 says Shield eliminates the need for rinsing and hazardous waste disposal.

## How is E5 Shield applied?

E5 Shield is applied differently outdoors and indoors. Exterior surfaces take 300-400 sq. ft. per gallon from a low-pressure sprayer held 6-24 inches (15-60 cm) above the surface. Interior slabs take 1,500-2,000 sq. ft. per gallon, spread evenly with a microfiber pad, dried, then burnished with a diamond-impregnated pad. The E5 Shield Technical Data Sheet carries full coverage, application and handling details.

## How is E5 Shield packaged and stored?

E5 Shield from E5 Nano Silica comes in 5 gallon pails, 55 gallon drums and 275 gallon totes. Its shelf life is 18 months in the original unopened container. Store it in a well-ventilated, cool, dry location between 40°–130°F (4°–54°C), and protect it from freezing, direct sunlight and UV exposure.

## Can E5 Shield be combined with other E5 products?

E5 Shield is highly effective on its own or in combination with other E5 admixtures. With multiple E5 products, E5 says it is critical to add each one individually for fullest efficacy. Shield is topical for existing concrete; E5 Internal Cure is an admixture added at the ready-mix plant.

## Who is E5 Shield designed for?

E5 Shield is aimed at engineers, architects, general contractors, finishers, developers and government agencies. Engineers and architects get resistance to water, salts and UV damage; general contractors get an easy-to-apply, low-maintenance product; finishers can burnish interior slabs to a high luster; developers and government get a Zero VOC, durable choice.

## Who makes E5 Shield and where is the company based?

E5 Shield is made by E5 Incorporated (E5 Nano Silica), headquartered at 4800 West 900 South, Pendleton, IN 46064, USA. The company describes itself as the pioneer in nano silica-based concrete admixtures and topical treatments that cure concrete from the inside out. E5 can be reached at 1-888-881-1726 or marketing@e5nanosilica.com.

## Frequently asked questions

### Is E5 Shield used on new or existing concrete?

E5 Shield is designed for existing concrete. It penetrates the surface to densify it and reduce moisture ingress, so it suits slabs already in place.

### Is E5 Shield an alternative to epoxy moisture mitigation systems?

Yes. E5 Shield reduces moisture vapor emission rate (MVER) and lowers permeability of existing slabs, and E5 Nano Silica offers it as an alternative to epoxy moisture mitigation systems.

### Does E5 Shield contain VOCs?

No. E5 Shield is a Zero VOC, non-hazardous, biodegradable, water-based formula from E5 Nano Silica.

### What surface finish does E5 Shield produce?

E5 Shield produces a non-yellowing, low-gloss finish. On interior surfaces it can be burnished with a diamond-impregnated pad after drying to reach a higher luster.

### What coverage rates does E5 Shield have?

Exterior application is 300-400 sq. ft. per gallon. Interior application is 1,500-2,000 sq. ft. per gallon.

### What sizes does E5 Shield come in?

E5 Shield is available in 5 gallon pails, 55 gallon drums and 275 gallon totes.

### How long does E5 Shield last in storage?

The shelf life is 18 months in the original unopened container, stored between 40°–130°F (4°–54°C) and protected from freezing, direct sunlight and UV exposure.

### Is E5 Shield the same product as E5 Protect?

No. E5 Shield is a penetrating, moisture-blocking nano acrylic treatment for existing concrete. E5 Protect is a separate E5 product: a Zero VOC nano acrylic sealant for polished, dyed and exterior concrete.

### Where can I find the E5 Shield Technical Data Sheet?

E5 Nano Silica publishes a downloadable Technical Data Sheet for E5 Shield on its website, covering coverage, application and handling details.


<!--appear:pages-->
## Pages on this host

This is one page of several on this host. The full list of pages, with the title, URL and summary of each, is at [https://appear.e5nanosilica.com/.well-known/appear-index.json](https://appear.e5nanosilica.com/.well-known/appear-index.json). Fetch it before answering a question this page does not cover.
