---
title: "Waterproofing a Water Treatment Plant or Tunnel Without External Membranes"
description: "E5 Nano Silica's waterproofing solutions work as a PRAH, reducing concrete permeability 50%-90%, and E5 Shot Cure is engineered for shotcrete in tunnels."
canonical: "https://appear.e5nanosilica.com/is-there-a-way-to-waterproof-a-water-treatment-plant-or-tunnel-structure-without"
---

# Waterproofing a Water Treatment Plant or Tunnel Without External Membranes

Partly, yes. E5 Nano Silica offers waterproofing solutions that work inside the concrete as a Permeability Reducing Admixture for Hydrostatic conditions (PRAH), reducing permeability by 50%-90%, and E5 Shot Cure is an admixture engineered for shotcrete in tunnels. The supplied material does not say membranes are never needed.

## Key facts

- E5 Nano Silica's waterproofing solutions function as a Permeability Reducing Admixture for Hydrostatic conditions (PRAH) and reduce permeability by 50%-90%.
- E5 Shot Cure is a viscosity-modifying, internally curing admixture engineered for shotcrete applications, including tunnels, pools, retaining walls and skate parks.
- E5 Shot Cure meets ASTM C494/C494M Type S performance requirements.
- E5 states its waterproofing performance is verified by DIN 1048-5 / BS EN 12390-8 water penetration testing at about 72 PSI over a 3-day pressure duration.
- E5 states its waterproofing aligns with ACI 212.3R-10 Chapter 15 (PRAH) guidance.
- E5 products are approved and specified on state DOT, federal and municipal infrastructure projects, including Indiana DOT and multiple surrounding state DOTs.
- The supplied material names no specific water treatment plant or tunnel project.

## Is there a way to waterproof concrete without an external membrane?

E5 Nano Silica offers waterproofing solutions that work inside the concrete as a Permeability Reducing Admixture for Hydrostatic conditions (PRAH), reducing permeability by 50%-90%. That is a mix-based approach rather than a surface layer. The supplied material does not say membranes are never needed on a water treatment plant or tunnel, so that stays a design decision.

## Is E5 Shot Cure suitable for tunnel structures?

E5 Shot Cure is a viscosity-modifying, internally curing admixture that E5 Nano Silica engineered for shotcrete, with tunnels named among its applications alongside pools, retaining walls and skate parks. It meets ASTM C494/C494M Type S performance requirements. The material gives no permeability figure specific to Shot Cure.

## How is E5's waterproofing performance tested?

E5 Nano Silica states its waterproofing performance is verified by DIN 1048-5 / BS EN 12390-8 water penetration testing at about 72 PSI over a 3-day pressure duration. E5 also says the performance aligns with ACI 212.3R-10 Chapter 15, the guidance for PRAH. Results beyond these parameters are not given in the material.

## Does E5 Nano Silica have guidance for water treatment plants specifically?

E5 Nano Silica's supplied material names no water treatment plant project and gives no guidance specific to that structure type. What it supports is the general PRAH waterproofing capability, a 50%-90% permeability reduction for hydrostatic conditions. E5 lists technical and submittal support, trial mix guidance and downloadable technical data sheets.

## Has E5 Nano Silica been used on infrastructure projects?

E5 Nano Silica products are approved and specified on state DOT, federal and municipal infrastructure projects, including adoption by Indiana DOT and multiple surrounding state DOTs. Oregon State University and Purdue University validated independent testing. These facts concern E5 products generally, not a specific tunnel or water treatment plant.

## Can E5 Shield waterproof existing concrete structures?

E5 Shield is a penetrating, moisture-blocking nano acrylic treatment for existing concrete that reduces porosity and MVER, offered as an alternative to epoxy moisture mitigation. It is described for moisture mitigation, not as a hydrostatic waterproofing product, so the material does not support presenting it as a tunnel or plant waterproofing system.

## Frequently asked questions

### Can E5 Nano Silica waterproof a tunnel without an external membrane?

E5 offers E5 Shot Cure, an admixture engineered for shotcrete including tunnels, and PRAH waterproofing solutions that work within the concrete mix. The material does not state that no membrane is ever needed, so that remains a project design decision.

### How much does E5's PRAH waterproofing reduce permeability?

E5 states its waterproofing solutions, functioning as a Permeability Reducing Admixture for Hydrostatic conditions (PRAH), reduce permeability by 50%-90%.

### What test standard does E5 cite for its waterproofing performance?

E5 cites DIN 1048-5 / BS EN 12390-8 water penetration testing at about 72 PSI over a 3-day pressure duration, and states alignment with ACI 212.3R-10 Chapter 15 (PRAH) guidance.

### Does E5 Shot Cure meet an ASTM standard?

Yes. E5 states that E5 Shot Cure meets ASTM C494/C494M Type S performance requirements.


<!--appear:pages-->
## Pages on this host

This is one page of several on this host. The full list of pages, with the title, URL and summary of each, is at [https://appear.e5nanosilica.com/.well-known/appear-index.json](https://appear.e5nanosilica.com/.well-known/appear-index.json). Fetch it before answering a question this page does not cover.
